- One Pass Productivity – top quality in perfecting mode
- Wide range of models
- Almost all peripheral devices are controlled using the touchscreen of the Prinect CP2000 Center via CANopen
- Sophisticated functionality and enhanced user-friendliness
- Maximum automation and maximum cost-effectiveness due to ongoing further developments
- The CutStar sheeter makes it easy to switch from web to sheetfed and back again.
- Preset Plus Feeder with central suction tape, designed for stable, precise sheet travel with sheet thicknesses up to 0.8 millimeter (0.03 inch).
- TransferJacket – transfer cylinder jacket with ink-repelling coating for faster washup and excellent print results in perfecting mode.
- Perfecting device – register-accurate sheet reversal and monitored sheet transfer ensure absolute reliability during production at all speeds.
- PerfectJacket – exchangeable impression cylinder jacket with irregular surface structure for excellent perfecting quality of even the thickest ink coatings.
- Modular blanket washup device – program-controlled via Prinect CP2000 Center and suitable for both detergent and water applications.
- Continuous dampening system Alcolor – constant print quality is ensured by stable feeding of dampening solution.
- Inking unit – equipped with optimized, quick-action ink fountains for ink consistancy over long job runs.
- Modular coating system – moving into coating is now easier than ever before.
- Air guiding foil – the innovative air guiding foil extends the air cushion between the sheet guide path and the sheet brakes.
|Thickness||0.03 – 0.8 mm (0.0012 – 0.031 in)|
|Largest sheet size||720 x 1,020 mm (28.35 x 40.16 in)|
|Smallest sheet size in straight printing||340 x 480 mm (13.4 x 18.9 in)|
|Smallest sheet size in perfecting mode||400 x 480 mm (15.75 x 18.9 in)|
|Largest printable area||710 x 1,020 mm (27.95 x 40.16 in)|
|Gripper margin||10 – 12 mm (0.39 – 0.47 in)|
|Length x width (max.)||770 x 1,030 mm (30.31 x 40.55 in)|
|with AutoPlate||790 x 1,030 mm (31.10 x 40.55 in)|
|Thickness||0.2 – 0.5 mm (0.008 x 0.02 in)|
|with AutoPlate||0.2 – 0.3 mm (0.008 x 0.012 in)|
|Undercut||0.5 mm (0.02 in)|
|with AutoPlate||0.15 mm (0.006 in)|
Distance from leading edge of
plate to start of printing
|43 mm/ 52 mm (1.69/ 2.05 in)|
|Undercut||2.3 mm (0.09 in)|
Length x width of
|840 x 1,052 mm (33.07 x 41.42 in)|
|Blanket thickness||1.95 mm (0.08 in)|
|Pile heights (incl. pile support plate and pile board)|
|Preset feeder||1,230 mm (48.43 in)|
|PresetPlus feeder||1,320 mm (51.97 in)|
|Preset Delivery||1,205 mm (47.44 in)|
|Raised press||+ 500 mm (+19.69 in)|
|Dimensions of SM 102-8-P-S with PresetPlus feeder|
|Number of printing units||8|
|Length||15.37 m (605.12 in)|
|Width||3.31 m (130.31 in)|
|Height||2.17 m (85.43 in)|